Electrical wiring at home can be a dangerous ordeal and care has to be taken when doing your home wiring. You may choose your home wiring on your own or choose to hire a professional. Whichever way you choose, you need to know the basic tips when doing your home wiring.

Important home wiring tips

electriclasleftasdfghjkl

Cable choice

At all times it is an electrical procedure to choose the right cable. You should not try to save on the cables as they make the backbone of your home or office electrical system. You may need to settle for CAT7 cables. These are twisted pair cables with strong shields around them. They have a low voltage drop and carry more power and are recommended by most professionals.

Enclosure size

It is advisable to choose an enclosure that has a lot of room. The enclosure you choose should also act as the center of all your installations. A general recommendation is to have about twenty percent additional space for future expansions. For newly built homes, you should consider enclosure for the sub distribution boards.

Use of terminals

When doing your wiring ensure that you go for terminal blocks for the enclosures. These terminal blocks help to keep the wiring organized. Labeling separators and holders are also very important for home wiring. Using these terminals also makes sure you do not have many cables into one spot.

Finger trunking

For a proper organization of your wiring, finger trunking is highly recommended. The trunking can be placed between the rails of DIN. Keep in mind however that if you are doing an outer trunking, then it will have to be twice bigger than the other trunking.

 

Documentation

Putting labels on output and input cables is important. This makes it easier to set up configuration. Your electrical system should be flexible, easy to modify or expand. With these documentations, access to the enclosure easies all the way.

Enclosure layout

electricalsrightsdfghjkYou should plan the layout of how to intend to terminate your equipment, cable or circuit protection at the distribution board. It is advisable to keep your circuit board towards the downside of your enclosure with power supplies. If you are doing cable routing, you should leave enough space on both sides of the enclosure. High voltage cables should be to the right of the box and low voltage ones to the left.

These are some of the simple tips you should keep mind when carrying out your home wiring. Be keen to check out these areas even when your installation is being done by a professional to ensure you are safe.